Author(s): Lu M, Wei X
Abstract Share this page
Abstract Laboratory-scale experiments were conducted in order to evaluate the performance of a novel treatment process for oilfield wastewater based on combining chemical oxidation, performed by a zerovalent iron (ZVI), ethylenediamine tetraacetic acid (EDTA) and air process, with biological degradation, carried out in a batch activated sludge reactor. The influence of some operating variables was studied. The results showed that the optimum pretreatment conditions were 150 mg/L EDTA, 20 g/L ZVI, and a 180-min reaction time, respectively. Under these conditions, removal efficiencies for hydrolyzed polyacrylamide (HPAM), total petroleum hydrocarbons (TPH), and chemical oxygen demand (COD) were 66\%, 59\%, and 45\%, respectively. During the subsequent 40 h of bioremediation, the concentrations of HPAM, TPH, and COD were decreased to 10, 2 and 85 mg/L, respectively. At the end of experiments, the total removal efficiencies of HPAM, TPH, and COD were 96\%, 97\% and 92\%, respectively. Copyright © 2010 Elsevier Ltd. All rights reserved.
This article was published in Bioresour Technol
and referenced in Journal of Environmental & Analytical Toxicology