Author(s): Jain AK, Gupta VK, Bhatnagar A, Suhas
Abstract Share this page
Abstract A number of low cost adsorbents from steel and fertilizer industries wastes have been prepared and investigated for the removal of anionic dyes such as ethyl orange, metanil yellow and acid blue 113 from aqueous solutions. The results indicate that inorganic wastes, i.e. blast furnace dust, sludge and slag from steel plants are not suitable for the removal of organic materials, whereas a carbonaceous adsorbent prepared from carbon slurry of fertilizer industry was found to adsorb 198, 211 and 219mg/g of ethyl orange, metanil yellow and acid blue 113, respectively. The adsorption of dyes on this adsorbent was studied as a function of contact time, concentration, particle size and temperature by batch method. The adsorption isotherm conformed to Langmuir model and the adsorption was found to be exothermic and physical in nature. Kinetic data conforms to Lagergren's equation with good correlation coefficients varying from 0.9998 to 0.9999 indicating that the adsorption is a first-order process. The adsorption data on carbonaceous adsorbent was compared to a standard activated charcoal sample and it was found that the prepared adsorbent is about 80\% as efficient as standard activated charcoal and therefore, can be used as low cost alternative ( approximately 100 US dollars per ton) for colour removal from effluents.
This article was published in J Hazard Mater
and referenced in Journal of Nursing & Care