alexa Abstract | Fourier Analysis of Milling Force for General Helical Cutters via Spacetime Convolution, Part 1: Model Development
ISSN: 2168-9873

Journal of Applied Mechanical Engineering
Open Access

OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations

700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)

Research Article Open Access

Abstract

A space-time convolution approach to analyze the milling force for a general helical cutter is proposed. The single flute cutting force is firstly established through an integrated space-time convolution process. Subsequently, multi-flute milling forces are obtained through convolution integration in time domain (i.e., angular domain). In this convolution force model, convolution theorem does not apply directly and a modified convolution theorem is presented to find the Fourier coefficients of the total milling force for any analytically definable helical cutter. From the Fourier analysis, the magnitudes of higher order Fourier coefficients are shown to drop off quickly. Therefore, the capability to extract a small number of Fourier coefficients as characteristic values of milling forces is an important advantage of this convolution force model. Furthermore, this model provides a convenient means to calculate the Fourier coefficients of the milling forces if the profile of cutter/workpiece can not be analytically definable and only the discrete values of cutter/workpiece profile data are given from scanning. Also, the general effects of cutter geometry and cutting parameters on the spectra characteristics of the milling forces are extracted and discussed. Based on the spectra characteristics, the strategy of selecting cutters for rough and finish machining in slot milling is presented.

To read the full article Peer-reviewed Article PDF image | Peer-reviewed Full Article image

Author(s): Zheng CM and Junz Wang JJ

Keywords

Fourier coefficients, Force model, Space-time convolution, Modified convolution theorem, General helical cutter, Applied Theories on Machines,External Force, Mechanism, Mechanical Properties, Fluid Bodies, Thermodynamics methods, Human-Machine-Interfaces, Robotics methods, Mechatronics, Mechanical Systems, Machine

Share This Page

Additional Info

Loading
Loading Please wait..
 
 
 
 
Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version
adwords