alexa Abstract | LINEAR STATIC ANALYSIS OF MASONRY INFILLED R.C.FRAME WITH &WITHOUT OPENING INCLUDING OPEN GROUND STOREY
ISSN ONLINE(2319-8753)PRINT(2347-6710)

International Journal of Innovative Research in Science, Engineering and Technology
Open Access

Like us on: https://twitter.com/ijirset_r
OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations

700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)

Research Article Open Access

Abstract

Masonry infill walls are mainly used to increase initial stiffness and strength of reinforced concrete (RC) frame buildings .It is mainly considered as a non-structural element. In many cities of India, it is very common to leave the first storey of masonry infilled reinforcement concrete (RC) frame building open preliminary to generate parking space or any other purposes (Ex-Reception lobbies) in the first storey. This Open First storey is also termed as “Soft Storey”. The upper storeys have brick infilled wall panels with various opening percentage in it. This type of buildings are highly undesirable in seismically active areas because various vertical irregularities are created in such buildings which have consistently performed very poor behavior during past earthquake. In the present study, it is attempt to access the performance of masonry infilled reinforced concrete (RC) frames with open first storey of with and without opening. In this paper, symmetrical frame of college building (G+5) located in seismic zone-III is considered by modeling of initial frame. With reference to FEMA-273, & ATC-40 which contain the provisions of calculation of stiffness of infilled frames by modeling infill as a “Equivalent diagonal strut method”. Therefore, the infill panels are modeled as a equivalent diagonal strut method. This linear static analysis is to be carried out on the models such as bare frame, strut frame, strut frame with centre &corner opening, which is performed by using computer software STAAD-PRO from which different parameters are computed. In which it shows that infill panels increase the stiffness of the structure. While the increase in the opening percentage leads to a decrease on the lateral stiffness of infilled frame.

To read the full article Peer-reviewed Article PDF image | Peer-reviewed Full Article image

Author(s): Prof. P.B Kulkarni, Pooja Raut , Nikhil Agrawal

Keywords

Masonry infilled frame, Stiffness, Equivalent Diagonal Strut Method, Seismic Effect, Aerospace Engineering,Applied Electronics,Biochemistry,Biogenetic Engineering,Biomedical Engineering,Botany,Fluid Dynamics.

Share This Page

Additional Info

Loading
Loading Please wait..
 
 
Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version
adwords