700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ ReadersThis Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)
Research Article Open Access
This paper presents an optimization design method of structure for miniature engraving machine to improve the comprehensive performance of static and dynamic. Firstly, the finite element model of miniature engraving machine is established in the ANSYS software. Secondly, based on this finite element model, static and dynamic analysis is implemented. Thirdly, multi-objectives optimization based on orthogonal experiments is processed by taking the mass of the structure, the maximum deformation, the maximum stress and the first-order natural frequency as the objective functions and choosing three major sizes which have the most remarkable influences on the above mentioned objectives as the design variables. Finally, the optimal solution of optimization design is searched by adopting the grey relational analysis which makes the mass reducing 3.422%, the maximum deformation reducing 14.658%, the maximum stress reducing 10.621% and the first-order natural frequency increasing 7.014% simultaneously. Research indicates that orthogonal experiment method and the grey correlation analysis method has higher practicability.
Optimization design, Multi-objectives, Orthogonal experiment method, Grey correlation analysis, Gaoyan Zhong*, Jiangyan Xu, Tian Jinling, and Zhang Lifei