alexa Design and Setup the Sampling System to Modify and Reduce the Deposition in Sampling Fluid Pipe Lines by Reducing the Pressure Drop

OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Design and Setup the Sampling System to Modify and Reduce the Deposition in Sampling Fluid Pipe Lines by Reducing the Pressure Drop

Corrosion and deposition in Refineries and Petrochemicals is becoming one of the most critical and serious obstacle, and also can cause reduce the efficiency, performance, and analysis accurate of industrial instrument such as turbines, power plants, boilers, and especially sampling tube lines, because of increasing the pressure drop due to build-up deposits. To limit and minimize these deposits in sampling pipe lines would be uses a specially sampling system that design and discuss in this article.

Citation: Rowshanaie O, Mustapha SB, Rowshanaie H, Jadbaba SM (2014) Design and Setup the Sampling System to Modify and Reduce the Deposition in Sampling Fluid Pipe Lines by Reducing the Pressure Drop. J Thermodyn Catal 5:131. doi: 10.4172/2157-7544.1000131

 
  • Share this page
  • Facebook
  • Twitter
  • LinkedIn
  • Google+
  • Pinterest
  • Blogger
 
adwords