21 / 29
Page 61
Notes:
Innovative Energy & Research | ISSN: 2576-1463 | Volume 7
Renewable Energy and Resources
Energy Materials and Fuel Cell Research
2
nd
International Conference on
&
August 27-28, 2018 | Boston, USA
Thermal properties improvement of column structures formed by nickel nano-materials in paraffin
wax
Che-Fu Su, Junwei Su, Hamed Esmaeilzadeh, Jirui Wqang, Edward Fratto, Majid Charmchi, Zhiyong Gu
and
Hongwei Sun
University of Massaschutte Lowell, USA
E
nhancing the thermal conductivity of phase change materials (PCMs) is attracting attention for renewable energy
applications such as solar, geothermal and wind energy. The use of energy storage can significantly improve the efficiency
of renewable energy systems due to their intermittent nature. Latent heat thermal energy storage is a particularly attractive
technique due to its high capacity and its ability to store energy at a nearly constant temperature corresponding to the phase
transition temperature of the PCM. Among the PCM, paraffin wax has been widely investigated and selected for latent heat
thermal energy storage applications due to its characteristics of high latent heat, chemical stability, less super-cooling, non-
corrosive, and low vapor pressure. However, most paraffin waxes have an unacceptably low thermal conductivity (e.g. paraffin:
~0.25 W/m
o
C). This has severely limited the application of current PCMs for high power, transient and large scale systems
and is one of the major challenges facing energy industries such as renewable energies and waste heat recovery. The present
work aims to overcome this undesirable property by manipulating metal fillers including nickel (Ni) nanoparticles/nanowires
within the paraffin wax to improve its thermal conductivity. The column structure of Ni fillers in paraffin wax was formed by
exposing it to a uniformmagnetic field while the temperature of the composite was maintained above the melting temperature
of paraffin wax and then cooling down the materials quickly to its solidification temperature. The formation of magnetic
dipoles in Ni fillers and the induced moments interacting with each other leads to the formation of columns of particles/
nanowires under the external magnetic field. It was found that the column structure formed depends on several parameters
such as the strength of the magnetic field, material and geometry of particles, and viscosity of melted PCM. In addition, a finite
element method is also developed to investigate the motion phenomenon for Ni fillers suspending in a non-magnetic fluid
under a uniform magnetic field. The correlation between thermal conductivity, magnetic processing parameters, and filler
column structures will be presented in this paper.
Biography
Che-Fu Su is a PhD student of the University of Massachusetts Lowell. He received an M.S. from the West Texas A&M University in 2007 and James E. Moreland
Safety Scholarship when he was pursuing his M.S. degree. Now, his research interests lie in the area of Phase Change Materials, especially for thermal conductivity
enhancement. He mainly focuses on the design of the apparatus setup and sample fabrication for this research project, and this research is funded by the National
Science Foundation.
chefu_su@student.uml.eduChe-Fu Su et al., Innov Ener Res 2018, Volume 7
DOI: 10.4172/2576-1463-C2-005