alexa CHARACTERISTICS STUDIES ON MULTILAYER THIN FILM IN CBD
ISSN ONLINE(2319-8753)PRINT(2347-6710)

International Journal of Innovative Research in Science, Engineering and Technology
Open Access

Like us on: https://twitter.com/ijirset_r
OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations

700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)

Research Article

CHARACTERISTICS STUDIES ON MULTILAYER THIN FILM IN CBD FOR PHOTOVOLTAIC SOLAR CELL MATERIAL

M.Kavitha1*, C.Gopinathan2, R.Chandramohan3, K.Neyvasagam1** and P.Pandi4
  1. Assistant Professor, Department of Physics, The Madura College, Madurai – 11 Tamil nadu India
  2. Associate Professor and Head, Department of Solar Energy, School of Energy Sciences, Madurai Kamaraj University, Madurai – 21. Tamil nadu India
  3. Associate Professor ,Department of Physics, Sree Sevugan Annamalai College, Devakottai-630303,Tamil nadu India
  4. Research Scholar, Department of Physics, The Madura College, Madurai – 11 Tamil nadu India
Related article at Pubmed, Scholar Google
 

Abstract

Multilayer thin films have been prepared by chemical bath deposition technique. The films depend on the bath parameter like pH, temperature and time duration. Film has differentiate the three way and then coated on the ITO substrate .The composition of the thin film material like ITO/CdS/ZnS, ITO/CdS/ZnS/ZnO and ITO/CdS/ZnS/TiO2 /ZnO and ZnO is acted the buffer layer. The main objective of the work this material is acted on the photovoltaic solar cell material. A characteristics study on material is XRD, UV, PL, SEM and J-V characterisation. From the XRD, has analysed the structural parameters like grain size, micro strain value and dislocation density. The energy transition and optical parameter are carried out by UV studies. Photon emission and excitation in near the energy band can identified the PL studies and specified the quantum yield position is 0.999. The surface morphological has studied in the SEM data. J-V characteristics are studied and found the efficiency of the photovoltaic cell is increased. So the material acted the photovoltaic solar cell material by low cost technique. These results are reported

Keywords

Share This Page

Additional Info

Loading
Loading Please wait..
Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version
adwords