alexa Abstract | Neural Networks Based Approach for Machining and Geometric Parameters optimization of a CNC End Milling
ISSN ONLINE(2319-8753)PRINT(2347-6710)

International Journal of Innovative Research in Science, Engineering and Technology
Open Access

Like us on:
OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations

700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)

Research Article Open Access


To select the optimum parameters it is necessary to determine them at first for the given machining situation. There are several techniques available to determine the optimum values of these parameters, in this paper machining parameters, cutting speed, feed, depth of cut, and one geometric parameter rake angle are considered for optimization. The neural networks were developed for predicting the results theoretically. To validate the results experimentally trials are then carried out a CNC milling using HSS tool by continuous running condition under dry run on the AISI 1040 MS plate of 140 X 120 X 10 mm workpiece. The predicted results match 90 % including the residuals. Thus proves the neural network is used for optimization of geometric and machining parameters.

To read the full article Peer-reviewed Article PDF image | Peer-reviewed Full Article image

Author(s): Nilesh Pohokar , Lalit Bhuyar


Geometric parameter, Machining parameters ANN, CNC milling, Tool life, Neural Network

Share This Page

Additional Info

Loading Please wait..
Peer Reviewed Journals
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version