Our Group organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Automobile Engineering In Industries

In engineering systems there are variables that need to be monitored and regulated for optimum performance. For mechanical and fluid systems, the most important variables are position, velocity, force, torque, temperature, flow rate, and pressure. In general, sensors and instruments are used to measure the physical quantities of the system (or process) in real-time.There are three basic processes involved in sensor measurements. The senor data acquisition process is about converting the measured physical variables into the electrical quantities such as resistance, capacitance, or inductance through properties of special materials like a diaphragm or metallic wire. The sensor data manipulation process uses the converted electrical quantity to generate the corresponding electrical voltage (or current) for representing the sensor measurement. The final process is the sensor data transmission in which the sensor measurement represented by the output voltage (or current) is to be physically sent to the control room that might be away from the location of the senor measurement.Sensor application and sensor design are two closely related processes. Sensor application starts with choosing an available sensor that is able to measure the unknown variable such as force, temperature, and pressure required in engineering systems as the electrical voltage (or current). Sensor design starts with specifying sensor variables, ranges, and functions, and then implements them with physical materials and electrical circuits. Equations must be established to represent the relationships of all involved variables. Usually, one set of sensor equations is used in sensor application and the inverse of the same set of equations is used in sensor design. [Cheng S (2013) Sensor Data Acquisition, Manipulation, and Transmission.]
  • Share this page
  • Facebook
  • Twitter
  • LinkedIn
  • Google+
  • Pinterest
  • Blogger

Last date updated on September, 2024

Top