Our Group organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.
Warping Parameters Influence on Warp Yarns Properties: Part 2: Warp Yarn Material and Cone position on Warping Creel
Warping is a low yield operation owing to the time needed for creeling; the creels are the frames on which the cones which feed the warper are pinned. The number of cones depends on the type of fabric to be produced. The yarns are wound side by side and parallel one another on the beam, Also keep in mind that the number of yarns per beam is in the hundreds or thousands and that there must, at least, be one supply package for each of these yarns, if possible with the same tension, so the cone position and their accessibility are two important factors for the operator.
- Share this page
