Our Group organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Microstructure, Mechanical Properties and Corrosion Behavior

SiC particle reinforced powder metallurgy (PM) Al-Mg-Cu-Sn matrix composites were fabricated by hot-press sintering and hot extrusion. The effects of solution treatment temperature and SiC particle content on the microstructure, mechanical properties and corrosion behavior of the composites were studied using scanning electron microscopy, Vickers hardness testing, tensile testing and electrochemical experiments. The results show that increasing SiC particle content improves the tensile strength of the Al-Mg-Cu-Sn matrix composites between room temperature and cryogenic temperature. The yield strength of Al-Mg-Cu-Sn composite with 10 vol.% SiC particle content between at 293 K and 77 K increases from 63 MPa to 276 MPa and 106 MPa to 327 MPa, respectively. The solution treatment temperature (

read more

..)

powder-metallurgy-mining-as-extruded

 

 

 

powder-metallurgy-mining-stress-strain

  • Share this page
  • Facebook
  • Twitter
  • LinkedIn
  • Google+
  • Pinterest
  • Blogger
Top