alexa Prevention of Thermal Failures in Down-The- Hole Butto
ISSN ONLINE(2319-8753)PRINT(2347-6710)

International Journal of Innovative Research in Science, Engineering and Technology
Open Access

Like us on:
OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations

700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)

Special Issue Article

Prevention of Thermal Failures in Down-The- Hole Button Bit

Koteswararao.B1, Ravi. D2, P. Satish3
  1. Assistant Professor, Department of Mechanical Engineering, Gurunanak Institutions Technical Campus, Ibrahimpatnam, Affiliated to JNTU, Hyderabad, kukatpally, Hyderabad, India
  2. Assistant Professor, Annamacharya Institute of Technology and Sciences, Piglipur, Batasingaram, Affiliated to JNTU, Hyderabad, kukatpally, Hyderabad, India
  3. Assistant Professor, Sri University College of Engineering Kakinada, Kakinada, Affiliated to JNTU, Kakinada, India
Related article at Pubmed, Scholar Google


DTH is short for "down-the-hole". The down-the-hole drilling is used to produce large-diameter holes or bores in to the hard rock surfaces of earth crust. Generally the life of bit is 200 Metres because of insufficient of cooling or rough handling the life of button bit reduces. To avoid the cracks, wear and tear on the button bit there is a necessity to change material and design. The bottom surface of the button bit subjected to high thermal stress. Due to high temperature and impact force there is a chance of deflection of the head. In my paper we are going to design a new model to improve the heat transfer rate as well as high strength material. The results taken based on ANSYS software .Because while manual testing in the lab we got 98% nearer values to software value.


Share This Page

Additional Info

Loading Please wait..
Peer Reviewed Journals
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version