alexa Vehicle Scrutinizing using GPS & GSM Technologies Impl
ISSN ONLINE(2319-8753)PRINT(2347-6710)

International Journal of Innovative Research in Science, Engineering and Technology
Open Access

Like us on:
OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations

700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)

Special Issue Article

Vehicle Scrutinizing using GPS & GSM Technologies Implemented with Ardunio controller

To read the full article Peer-reviewed Article PDF image


Vehicle Scrutinizing is now one of the most popular technological changes in all over the world that is going to make our personal and business life lot easier. As the term suggests, it enables one to survey or overseer the location of vehicle in instant time with ANDROID APPLICATION. Vehicle scrutinizing system is a software & hardware system enabling the vehicle owner to track the position of their vehicle. Primarily, the system functions with the Global Positioning System (GPS), traditional cellular network such as Global System for Mobile Communications (GSM). Detailed vehicle location reports enhance your control over movement of goods. Monitor the speed and stoppage points in real-time and calculate the distance travelled and duration of stoppage, optimize fuel cost that improve efficiency by reducing operational cost can be obtained from a central operating centre through mobile phones or Internet. Getting realtime and playback data visualization. In this project ARDUINO series microcontroller is used for interfacing to various hardware peripherals. The current design is an embedded application, which will continuously monitor a moving vehicle and report the status of the vehicle on demand. For doing so an ARDUINO series microcontroller is interfaced serially to a GSM Modem and GPS Receiver. A GSM modem is used to send the position (Latitude and Longitude) of the vehicle from a remote place. The GPS modem will continuously give the data i.e. the latitude and longitude indicating the position of the vehicle. The GPS modem gives many parameters as the output. The same data is sent to the mobile at the other end from where the position of the vehicle is demanded and also internal memory(EEPROM) is used to store the mobile number and demanded data.


Share This Page

Additional Info

Loading Please wait..
Peer Reviewed Journals
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version