700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ ReadersThis Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)
Research Article Open Access
This paper presents a Low Noise Amplifier for UWB Radio Receiver at 8.72GHz using 0.18μm UMC Technology where 0.18μm technology is for lower power consumption. UWB Radio Receiver which made up in between the frequency range of 3.1GHz to 10.6GHz.The basic architecture of LNA comprises a RF amplifier in the middle of input matching network and the output matching network. We have designed a low noise amplifier that consist low noise figure, good input and output impedance matching and high gain and stability that exhibits the properties of standard MAX-2640 LNA, where operating temperature is 27 ºC gain is 20dB and would have good stability. We used cadence tool for the best performance and accuracy for results, this work represents an LNA schematic compose of Common gate LNA and Cascode LNA, where Common gate LNA is used for excellent input and output matching and the cascode LNA for low Noise figure and high gain, an additional feature is that single ended LNA employs inductive source degeneration concept (inductor Ls is connected to the source of transistor M1) where M1 has a greater control over the value of the real part of the input impedance through the choice of the inductance. Cascode transistor M2 is used to reduce the interaction of the tuned output with the tuned input and M2 is used to reduce the interaction of the tuned output with the tuned input.