alexa Abstract | DYNAMIC BEHAVIOUR OF HYBRID ALUMINIUM6061 METAL MATRIX REINFORCED WITH SIC AND FLY ASH PARTICULATES.
ISSN ONLINE(2319-8753)PRINT(2347-6710)

International Journal of Innovative Research in Science, Engineering and Technology
Open Access

Like us on: https://twitter.com/ijirset_r
OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations

700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)

Research Article Open Access

Abstract

The Aluminium alloy composite are made by mixing particulate in a molten alloy. These composites are hard, rigid, and tough and possess good mechanical properties their ductility will decrease and will gain better resistance to corrosion these type of aluminium metal matrix composites are used in automotive application, aerospace and construction. They even are enriched with good weight to strength characteristics. The present work is concentrated in a view to produce such type of enhanced composites. the cheaper method of fabricating Aluminium metal matrix composite is by stir casting method and by proper reinforcement selection. Silicon Carbide (SiC) is ceramic material which is hard and can enhance aluminium strength, fly ash is a power plant debri and easily available¹. The composition is selected on weight percentage basis SiC with 6 % and 9% and fly ash with constant 15 % and AL6061 T6 alloy as matrix material. With proper vortex formation particulate dispenses wisely which is evident from SEM and EDS analysis. The mechanical tests are carried out and it is observed that tensile and hardness improved compared with monolithic alloy. The fatigue test was conducted using fully reversed cycle R=-1 using rotating bending machine at room temperature. Loads are defined by considering 0.5UTS, 0.7UTS and 0.9UTS to plot S-N curve.

To read the full article Peer-reviewed Article PDF image | Peer-reviewed Full Article image

Author(s): Arun.L.R, Saddam Hussain. B , Dr. Suneel Kumar N.Kulkarni

Keywords

Hybrid composite, al6061, fatigue, flyash, Sic, Aerospace Engineering,Applied Electronics,Applied Sciences,Biochemistry,Biogenetic Engineering,Biomedical Engineering.

Share This Page

Additional Info

Loading
Loading Please wait..
 
 
Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version
adwords