ISSN ONLINE(2319-8753)PRINT(2347-6710)

International Journal of Innovative Research in Science, Engineering and Technology
Open Access

Like us on:
OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations

700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)

Research Article Open Access


The submarine door mechanism is being analyzed for the identification of possible failure situations. An effort has also been made to give suggestions regarding the dimensions of the door model of submarine for further improvements. This will be helpful to the company to fabricate and also to show the results of the analysis to prospective customers. Purpose of the analysis is detect any flaws in the design stage can be identified and corrected in the analysis stage. Analysis stage acts as a prototype building stage where in the original is modeled and analyzed. The stress developed can be understood and suitably reduced by increasing or decreasing the dimensions, using a better material. The stress distribution can be understood and the maximum and minimum stress acting on the material can be estimated. In this project an effort has been made to carry out the analysis of “submarine door mechanism”. The project requires a basic knowledge of the analysis software and the working of the mechanism this is a complicated task, so to solve such problem COSMOS is the most preferred software tool, which has no boundary limit for analysis. Here Structural type of analysis carried out it includes a general overview of the submarine door mechanism CAD systems, FEM, the introduction to COSMOS. The final section of the documentation deals with the comparison of manual design results with the results obtained from the use of analysis software and if stresses result vary and factor of safety is high then we may require to go for optimization of particular part.

To read the full article Peer-reviewed Article PDF image | Peer-reviewed Full Article image

Author(s): Bhaskar Patil, Ravi G Lingannavar


Submarine, Submarine door, COSMOS, Structural Analysis, Optimization, CAD, SOM, FEM, Aerospace Engineering,Applied Electronics,Applied Sciences,Biomedical Engineering,Botany,Fluid Dynamics.

Share This Page

Additional Info

Loading Please wait..
Peer Reviewed Journals
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version