alexa Abstract | Zirconia and Nickel Based Thermal Barrier Coating
ISSN ONLINE(2319-8753)PRINT(2347-6710)

International Journal of Innovative Research in Science, Engineering and Technology
Open Access

Like us on: https://twitter.com/ijirset_r
OMICS International organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations

700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)

Research Article Open Access

Abstract

This research project focuses on thermal properties of Zirconium and nickel based materials. Zirconium ceramics with its low thermal conductivity, good adhesion properties with bond coat material which are nickel based alloys acts as a good thermal barrier coating material. Also, the focus on optimizing thermal barrier coating structure using Comsol Multiphysics 4.3 Software. Thermal barrier coating increase the engine operating temperatures hence increasing the efficiency and performance. Samples of Zirconium, Oxidised zirconium (zirconia) are prepared and thermal properties are found out using laser flash technique DLF-1200 equipment. Results show that oxidised zirconium with its very low thermal conductivity in the range 3.5-4.5 W/m.K for temperatures 25 degree C – 1000 degree C, is the suitable material to coat engine system components like piston, cylinder head, and exhaust manifold. Nickel super alloys used are Haynes 718,230,625 and nickel N out of which nickel n and nickel 718 have the lowest thermal conductivity ranging 5-22 W/m.K. More research should be done on the characteristic surface properties of oxidised zirconia to evaluate it as a thermal barrier coating material. Simulations are done for different values of thickness for bond coat and top coat of a thermal barrier coating and maximum and minimum von misses stress is calculated. Results show that optimized thickness for a thermal barrier coating is 60μm for bond coat and 120μm for the top coat which has the minimum stress value

To read the full article Peer-reviewed Article PDF image

Author(s): Dharam Katya

Share This Page

Additional Info

Loading
Loading Please wait..
 
 
Peer Reviewed Journals
 
Make the best use of Scientific Research and information from our 700 + peer reviewed, Open Access Journals
International Conferences 2017-18
 
Meet Inspiring Speakers and Experts at our 3000+ Global Annual Meetings

Contact Us

 
© 2008-2017 OMICS International - Open Access Publisher. Best viewed in Mozilla Firefox | Google Chrome | Above IE 7.0 version
adwords