ADR university, New Delhi, India.
Received Date: June 30, 2016; Accepted Date: July 04, 2016; Published Date: July 12, 2016
Citation: Biswal R (2016) Editorial on Purification of Petroleum Process. Oil Gas Res 2:114. doi:10.4172/2472-0518.1000114
Copyright: © 2016 Biswal R. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited
Visit for more related articles at Oil & Gas Research
It is a special engineering having linkage complete chemical process which is related to refiniries only, Transformation of the crude oil to Petroleum gas which is in liquefied form. Drilling of the oil is main process in crude oil transformation, slightly above atmospheric pressure only the process will happens. Preheating of crude oil is considered with exchanging heat technique.
Crude oil; Refineries; Distillation; Oil spilling; Petroleum; Gasoline
Three types of distillation will be there they are:
1. Light distillates
2. Heavy distillation
3. Distillation of middle compounds
Light distillation is having below these:
1. Heavy naph,
2. Liquid petroleum
Distillation of middle compounds are:
1. Diesel fuels for heavy large cc engines
3. Residential fuel
4. Low light fuels
Heavy distillation contains heavy fuels only. Pictorial representation of fuel processing and Atmospheric Distillation process are shown in Figures 1 and 2.
Maximum of the above processing and steps involved in the petroleum refining are should be like this only and they are not easily explainable in theoretical manner, but easily get at pictorial manner. Inlet crude oil product and intermediate stream flow of pure petrol flow results in the ending of process in petroleum refineries.