alexa

GET THE APP

Introduction to Design and Manufacture of a Heart Signal Simulator and Graphic Displayer Based on the ATmega Microcontroller | OMICS International| Abstract

Journal of Biological and Medical Sciences
Open Access

Our Group organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations
700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)
  • Research Article   
  • J Biol Med Sci,

Introduction to Design and Manufacture of a Heart Signal Simulator and Graphic Displayer Based on the ATmega Microcontroller

Shirzadfar H* and Khanahmadi M
Department of Biomedical Engineering, Sheikhbahaee University, Isfahan, Iran
*Corresponding Author : Shirzadfar H, Department of Biomedical Engineering, Sheikhbahaee University, Isfahan, Iran, Tel: +983136530125, Email: [email protected]

Received Date: Aug 21, 2018 / Accepted Date: Sep 03, 2018 / Published Date: Sep 10, 2018

Abstract

The ECG Simulator is a specialized device for testing and calibrating an electrocardiogram. Using this device, can be monitor electrocardiograms and fix possible errors and problems in the ECG device. Simulator can display heart signals in different algorithms and based on the signals generated, the electrocardiographic device is evaluated. Simulator has an important function in the development and design of an electrocardiograph and is an essential medical device.

This article examines an ECG simulator device with a graphic display that can display heart signals on a display, and is based on a microcontroller that is inexpensive compared to other ECG simulators, and has Architecture is simple.

Simulator designed based on two ICs 4521 and 4017, which is used for frequency division and counter. The quartz crystal to produce a proportional frequency, which is the frequency to set up ICs and Electrocardiograms, can be generated based on capacitor and resistor connections.

The displayer of this device is based on a microcontroller, which has a simple programming to indicate the signal obtained from the simulator on the LCD.

Keywords: ECG simulator; Electrocardiogram; Cardiac; Microcontroller; Displayer

Citation: Shirzadfar H, Khanahmadi M (2018) Introduction to Design and Manufacture of a Heart Signal Simulator and Graphic Displayer Based on the ATmega Microcontroller. J Biol Med Sci 2: 107.

Copyright: © 2018 Shirzadfar H, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Select your language of interest to view the total content in your interested language

Post Your Comment Citation
Share This Article
Article Usage
  • Total views: 2328
  • [From(publication date): 0-0 - Apr 20, 2021]
  • Breakdown by view type
  • HTML page views: 2160
  • PDF downloads: 168
Top