Technological Processing of Oil WasteSenkevich I*, Grigorov BA, Mardupenko AA
Polytechnical Institute, Department of Technology of Processing of Oil, Gas and Solid Fuel, National Technical University, Kharkov, Kharkov, Ukraine.
- *Corresponding Author:
- Senkevich I
Department of Technology of Processing of Oil
Gas and Solid Fuel
National Technical University
Kharkov, Kharkov, Ukraine
E-mail: [email protected]
Received Date: July 03, 2016; Accepted Date: July 18, 2016; Published Date: July 31, 2016
Citation: Senkevich I, Grigorov BA, Mardupenko AA (2016) Technological Processing of Oil Waste. Oil Gas Res 2:115. doi: 10.4172/2472-0518.1000115
Copyright: © 2016 Senkevich I, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Since oil waste is one of the most dangerous component of natural environment, the great attention should be paid for the problem of its keeping and processing. Oil waste may be processed in thermal, physical, chemical and biological ways. Present article describes the processing of oil waste by light thermal cracking. Products of thermal cracking of oil waste, due to their properties, may be widely used in motor oil and other kinds of fuel production.