Thermodynamic Parameters for the Solubility of Hydrogen in Tantalum- Aluminium AlloysTaxak M*, Kumar S and Krishnamurthy N
Fusion Reactor Materials Section, Bhabha Atomic Research Centre, Mumbai 400 085, Maharashtra, India
- Corresponding Author:
- Taxak M
Fusion Reactor Materials Section,
Bhabha Atomic Research Centre, Mumbai 400 085, India
Tel: +91 7312321424
E-mail: [email protected]
Received Date: October 17, 2016; Accepted Date: November 07, 2016; Published Date:November 11, 2016
Citation: Taxak M, Kumar S, Krishnamurthy N (2016) Thermodynamic Parameters for the Solubility of Hydrogen in Tantalum-Aluminium Alloys. Innov Ener Res 5:144.
Copyright: © 2016 Taxak M, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
The equilibrium solubility of hydrogen in Ta1-xAlx alloys (x=0, 1, 1.6, 2.4 and 3.2 atom % Al) was measured in the temperature range of 673 K to 873 K and hydrogen pressure range of 64 kPa to 115 kPa. The solubility decreases with increasing aluminium content at all temperatures and pressures investigated. From the equilibrium solubility data, partial molar free energy, enthalpy and entropy of solution of hydrogen were calculated. The relative partial molar enthalpy of hydrogen was found to increase with increasing Al content whereas the change in entropy was very small.