Spanish 
Chinese 
Russian 
German 
French 
Japanese 
Portuguese 
Hindi Research Article
Coating Removal Techniques in Aerospace Industries: Study Case
Davarpanah A1*, Hemat AH1 and Larki M21Department of Mechanic Engineering, Young Elite Sponsors Institute, Tehran, Iran
2Department of Mechanic Engineering, University of Applied Science and Technology, Kangan, Iran
- *Corresponding Author:
- Davarpanah A
Department of mechanic Engineering
Young Elite Sponsors Institute
Tehran, Iran
Tel: 989337223427
E-mail: afshindpe@gmail.com
Received Date: January 04, 2017; Accepted Date: February 01, 2017; Published Date: February 15, 2017
Citation: Davarpanah A, Hemat AH, Larki M (2017) Coating Removal Techniques in Aerospace Industries: Study Case. J Powder Metall Min 6: 155. doi:10.4172/2168-9806.1000155
Copyright: © 2017 Davarpanah A, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Abstract
In the recent years, aviation industry in terms of corrosion has been undertaken with million pounds. Therefore, by appropriate maintenance and husbandry, these effects could be decreased. Most of the aircrafts could be maintained by long term and short term inspection check. Nowadays, one of the most important and yet most underestimated support activities for corrosion control in aviation industry is protective coating removal like High pressure water, Sodium bicarbonate, Agricultural by-products, Sponge media, Petroleum based plastic media and Engineering bio-based media. Coatings removal techniques can actually degrade the substrate if they are not suited for the surfaces or are not performed correctly. This could have potential catastrophic consequences. However, because of ageing, many of these coatings eventually require removal and reapplication. In this research, the current state-of-the-art coating removal technologies in the aviation industry are discussed. Engineering bio-based media has more advantages than the other and it can be used between 8-15 times. Finally, worker health and safety will be an ever increasing priority when selecting a technique.
