alexa
Reach Us +32 25889658
Study On The Curing Characteristics And Synthesis Process Of Modified Urea-formaldehyde Resin With Low Formaldehyde Release | 53351
ISSN: 2155-6199

Journal of Bioremediation & Biodegradation
Open Access

Like us on:

Our Group organises 3000+ Global Conferenceseries Events every year across USA, Europe & Asia with support from 1000 more scientific Societies and Publishes 700+ Open Access Journals which contains over 50000 eminent personalities, reputed scientists as editorial board members.

Open Access Journals gaining more Readers and Citations
700 Journals and 15,000,000 Readers Each Journal is getting 25,000+ Readers

This Readership is 10 times more when compared to other Subscription Journals (Source: Google Analytics)
Recommended Conferences

2nd World Congress on Biopolymers & Bioplastics

Paris, France

4th Annual Congress on Soil, Plant and Water Sciences

Barcelona, Spain
Share This Page

Study on the curing characteristics and synthesis process of modified urea-formaldehyde resin with low formaldehyde release

3rd International Conference and Exhibition on Biopolymers & Bioplastics

Jiyou Gu, Xinxin Cao, Yanhua Zhang and Hanyan Tan

Northeast Forestry University, China

Posters & Accepted Abstracts: J Bioremed Biodeg

DOI: 10.4172/2155-6199.C1.003

Abstract
The modified urea-formaldehyde resin with low formaldehyde release was synthesized with different kinds of additives in this paper. And the curing characteristics were studied mostly. The results indicated that: the urea-formaldehyde resin with additive 1+2+3 showed the fastest cure rate, which improved about 15% compared with the blank sample, but the mechanical properties was poor. So the synthesis process was optimized based on the addition of assistant 1+2+3, the results showed that:â‘ melamine has a very significant effect on reducing free formaldehyde, when the added amount reached 3%, the formaldehyde release was only 0.28mg/L;â‘¡increased the viscosity of the resin can improve the bonding strength of the adhesive obviously.
Biography

Jiyou Gu is a Professor and the Dean in the College of Material Science and Engineering at Northeast Forestry University. He obtained his BSc degree in 1982 and his MSc degree in 1988 from Northeast Forestry University, and received his PhD degree from Kyushu University in Japan in 1996. He has been a Visiting Professor at the University of Tokyo in Japan and in Finland. His research interests cover the adhesives used on wood and the manufacture of plywood, fiberboard, and other wood products. He is particularly interested in design and synthesis of adhesives, improving the properties of adhesives, manufacture of adhesives, and optimization of adhesives functions.

Email: [email protected]

Top