Energy-efficient MAC for Wireless Sensor Networks
Asst professor, Dept of E&I, Bharath University, Chennai – 600073, India
|Related article at Pubmed, Scholar Google|
A compact blind oversampling data-recovery circuit was implemented by using a coarse data-recovery block and an add-drop first-in first out, and it was successfully applied to the universal serial bus (USB)2.0 high-speed packet data transmission. The proposed circuit recovered the serial input data by selecting the sampled data among the 5X oversampled data of a single data bit. It reduced the number of transistors by more than half and the lock time to zero, compared to the conventional blind oversampling data-recovery circuit using the de-multiplexing scheme for multibit-data. The proposed circuit was implemented with a 0.18- m CMOS process. It worked at the data rates ranging from 180 to 720 Mbps. The bit-error rate was measured to be less than 10 -12 with the 215- 1 PRBS data transmitted though a 5-m USB cable. The chip area and the measured power consumption for 480-Mbps operation were 0.185mm2 and 8.2mW, respectively.